
PTFE-Buchsen
0,01 €
Preis für die ausgewählte Ausführung
● Verfügbar
What are PTFE bushings? PTFE bushings are plain bearing sleeves manufactured from PTFE (polytetrafluoroethylene). In many industries, PTFE bushings are also referred to as Teflon bushings, as PTFE is widely known under that name. They are u
Produktdetails
What are PTFE bushings?
PTFE bushings are plain bearing sleeves manufactured from PTFE (polytetrafluoroethylene). In many industries, PTFE bushings are also referred to as Teflon bushings, as PTFE is widely known under that name. They are used to guide rotating or sliding components while reducing friction, wear and stick-slip behaviour.
Due to their low friction characteristics, PTFE bushings are suitable for applications where lubrication is limited, clean running properties are required, or chemical resistance is important.
Applications of PTFE bushings (Teflon bushings)
PTFE bushings are used in technical and industrial assemblies where a stable sliding interface is needed between a shaft and housing, or between moving components. Typical applications include pivot points, guide systems, hinge locations, sliding mechanisms and bearing housings in machinery and equipment.
Depending on load and motion type (rotary or linear), Teflon bushings are applied as a low-maintenance bearing solution in a wide range of assemblies.
Key properties of PTFE bushings
- Very low coefficient of friction for smooth sliding
- Good wear behaviour in sliding applications (depending on load and speed)
- Chemical resistance to many media
- Suitable for a wide temperature range
- Non-stick surface characteristics and low dirt adhesion
Types and dimensions
PTFE bushings are available in different designs such as plain sleeve bushings, flanged bushings and split bushings. Dimensions are typically defined by inner diameter, outer diameter and length. A flange design may be used for axial location or as a stop in the installation.
Material options and filled PTFE compounds
Depending on load and wear requirements, bushings can be produced from virgin PTFE or from filled PTFE compounds. Filled grades are used when higher compressive loads, improved wear resistance or specific running properties are required.
The correct selection of a PTFE plain bushing or Teflon bushing depends on factors such as load, motion type, tolerance requirements and the media the bushing is exposed to.
Artikelnummer: DEINDBAUTEI20260710115044
Versand & Rückgabe
Die verfügbaren Versandarten und Kosten werden im Checkout anhand Ihrer Lieferadresse angezeigt.
Weitere Informationen


